Water Soluble Transfer Sheet
Each sheet is approximately 4”x5”.
Place transfer paper ink-side down on white/light colored clay. Roll over the image with an acrylic roller, making sure it is flush and there are no air bubbles or corners lifting.
Run the transfer under a gentle stream of water. Rub excess paper off with your fingers, gently.
Allow the clay 5-10 minutes to air dry. Once it has dried to the touch, cut and bake clay pieces as normal. Be careful not to rub or smudge the clay too much when working with it.
Sealing is not required, but it is encouraged for extra protection. UV Resin and DuraClear are both great options, depending on the desired finish.